|
|
|
|
|
|
Mitigating
the Harmonics and
Correcting the Power Factor simultaneously! |
|
|
|
|
|
Introducing
an innovative, revolutionary and patented breakthrough technology
pioneered by
Synergy Energy Inc. |
|
|
OPTIMIZER,
tomorrow's GREEN
technology for today's industry
|
|
|
|
|
|
Until now, the
most popular method for mitigating 5th and 7th harmonics using a
passive device has been the phase shifting. With this approach, two
loads, such as Variable Frequency Drives (VFDs), are to work at the
same time and have equal power, so harmonics from one source of
nonlinear load is used to cancel the ones from the second source. In
reality such a perfect condition is very difficult to achieve and two
VFDs hardly ever operate simultaneously, making it nearly impossible to
apply the principles of phase shifting theory in real life.
As the result of more than 6 years of extensive theoretical
research, and development of many test laboratory apparatuses
and real application prototypes, as an unsurpassed solution for
simultaneous mitigation of harmonics and correction of power factor, OPTIMIZER™
is set to revolutionize the industry.
In the most simplistic form, OPTIMIZER™
is a passive device, which easily reduces electrical Current Total
Harmonic Distortion (ITHD) from 73%
to lower than 3.5% and Voltage
Total Harmonic Distortion (VTHD) from 10% to less than 1%, which are much
lower
than the ones required by IEEE 519. This effect in turn creates a clean
electrical power atmosphere for all other equipment in a facility.
OPTIMIZER™
improves the power factor
to 99.9%,
close
proximity of 100%,
and thereby eliminating surcharges imposed by
a utility company. The most important feature of the OPTIMIZER™
is the way it treats the Cause and not the Symptom of the problem.
In a
nutshell, OPTIMIZER™
is a patented product that while cleans the electrical power form 5th,
7th, 11th and 13th harmonics without a need for any phase shifting,
virtually eliminates any penalties imposed by local power utilities,
which may have resulted from a low power factor.
|
|
|
|
|
|
| System Configuration with
and without OPTIMIZER |
| Without OPTIMIZER |
|
With
OPTIMIZER |
|
|
|
| Test results at Voltage: 480V, Frequency: 60Hz and Non-linear
Load: 12.2HP |
|
|
 |
Line
current waveforms without
Optimizer
(THDi=71.2%
and Power Factor = 0.794 Lag) |
|
Line current waveforms with Optimizer
(THDi=3.5%
and Power Factor = 0.999 Lag) |
 |
| Test results at Voltage: 480V, Frequency: 60Hz and Non-linear
Load: 12.2HP |
 |
|
|
Line
voltage waveforms without
Optimizer
(THDv=4.9%) |
|
Line voltage waveforms with
Optimizer
(THDv=0.6%) |
 |
| Power
Factor Comparison |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Product
Catalogue |
|
To
view, download, and print the online PDF version of Synergy Energy Inc. Product Catalogue - 2012 Edition, Synergy
Energy Inc. Technical
Catalogue - 2012 Edition and Synergy
Energy Inc. Options
Catalogue - 2010 Edition, please
click on the corresponding images below:
|
|
|
|
 |
 |
Synergy Energy Inc.
Product Catalogue
2012 Edition |
Synergy Energy Inc.
Technical Catalogue
2012 Edition |
Synergy Energy Inc.
Options Catalogue
2010 Edition |
|
|
|
|
